9 CFR 381.121 Quantity of contents
381.121.c.3 The statement shall be in letters and numerals in type size established in relationship to the area of the principal display panel of the package and shall be uniform for all packages of substantially the same size by complying with the following type specifications:

381.121.c.3.i Not less than one-sixteenth inch in height on containers, the principal display panel of which has an area of 5 square inches or less;

381.121.c.3.ii Not less than one-eighth inch in height on containers, the principal display panel of which has an area of more than 5 but not more than 25 square inches;

381.121.c.3.iii Not less than three-sixteenth inch in height on containers, the principal display panel of which has an area of more than 25 but not more than 100 square inches;

381.121.c.3.iv Not less than one-quarter inch in height on containers, the principal display panel of which has an area of more than 100 but not more than 400 square inches;

381.121.c.3.v Not less than one-half inch in height on containers, the principal display panel of which has an area of more than 400 square inches.

381.121.c.3.vi The ratio of height to width of letters and numerals shall not exceed a differential of 3 units to 1 unit (no more than 3 times as high as it is wide). This height standard pertains to upper case or capital letters. When upper and lower case or all lower case letters are used, it is the lower case letter "o" or its equivalent that shall meet the minimum standards. When fractions are used, each component numeral shall meet one- half the height standards.

381.121.c.4 The statement shall appear as a distinct item on the principal display panel and shall be separated, from other label information appearing to the left or right of the statement, by a space at least equal in width to twice the width of the letter "N" of the style of type used in the quantity of contents statement and shall be separated from other label information appearing above or below the statement by a space at least equal in height to the height of the lettering used in the statement.
Prior segment of
9 CFR 381
Next segment of
9 CFR 381